This thin film antifouling, specially developed by us, is suitable for all sailboats and motor yachts that have a hard, smooth and low-friction surface. Its advantages in detail: awn antifouling trumps with a low layer thickness as well as a fast drying time. Plus, you can apply it to most old PTFE-based antifoulings without sanding - provided they're in perfect condition. (Our tip: If you're unsure, try it in a small area first to test compatibility.)Thin film antifouling is suitable for all waters and on GRP, wood or steel (not aluminum) surfaces.When rebuilding, prime your hull with a coat of awn Epoxy Primer beforehand.Yield: approx. 12 m² per liter.Caution: Antifouling products must be used safely.Always read label and product information before use.
|EUH, H and P phrases:||H226: Flammable liquid and vapour., H315: Causes skin irritation., H317: May cause an allergic skin reaction., H319: Causes serious eye irritation., H335: May cause respiratory irritation., H400: Very toxic to aquatic life., H410: Very toxic to aquatic life with long lasting effects., P101: If medical advice is needed, have product container or label at hand., P102: Keep out of reach of children., P103: Read label before use., P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., P235: Keep cool., P260: Do not breathe dust/fume/gas/mist/vapours/spray., P271: Use only outdoors or in a well-ventilated area., P273: Avoid release to the environment., P280: Wear protective gloves/protective clothing/eye protection/face protection., P302+P362+P364: IF ON SKIN: Take off contaminated clothing and wash before reuse., P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing., P501: Dispose of contents/container to...|
|Signal word:||Attention! Danger!|