Free shipping from 100 €
Shipping within 24h
Purchase comfortable on account

HEMPEL Hard Antifouling Hard Racing TecCel

HEMPEL'S HARD RACING TecCel 76880 is a high performance self-polishing antifouling with hard matrix that provides outstanding protection all season. Contains TecCel for less friction and higher speeds.

As an antifouling for boats made of GRP, wood, plywood and steel. Do not use on aluminum or otherlight metals. Risk of corrosion in case of direct contact. For cold and temperate waters. Yield : 1 m²/l

Yield : 1 m²/liter.
BAUA: N-69441
BAuA no. (white): N-68019
Contents: 0.75 l
EUH, H and P phrases: H226: Flammable liquid and vapour., H301: Toxic if swallowed., H318: Causes serious eye damage., H335: May cause respiratory irritation., H336: May cause drowsiness or dizziness., H410: Very toxic to aquatic life with long lasting effects., P101: If medical advice is needed, have product container or label at hand., P102: Keep out of reach of children., P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., P261: Avoid breathing dust/fume/gas/mist/vapours/spray., P273: Avoid release to the environment., P280: Wear protective gloves/protective clothing/eye protection/face protection., P305: IF IN EYES:, P310: Immediately call a POISON CENTER/doctor/…, P338: Remove contact lenses, if present and easy to do. Continue rinsing., P351: Rinse cautiously with water for several minutes., P391: Collect spillage., P403+P233: Store in a well ventilated place. Keep container tightly closed., P405: Store locked up., P501: Dispose of contents/container to...
Paint color: white
Signal word: danger!

You may also like these products

HEMPEL Light Primer
Contents: 2.25 l | Paint color: white
The top primer in boat building! High-quality 2-component epoxy primer for underwater and above-water use. The primer serves on rigid substrates as a good barrier layer against penetrating water vapor, on fiberglass reinforcements (plastic) for osmosis prevention and repair and on metals as corrosion protection. It can also be applied on plywood and hardwood. LIGHT PRIMER is a very good adhesion promoter for top coats and antifoulings. The last coat of primer before antifouling must still be tacky but no longer wet (″tacky″ condition) when antifouling is applied. If this time is exceeded, the primer must be sanded. Alternatively, another thin coat of primer can be applied. Thinner: 845Yield: 5-8 m² / liter.

Content: 2.25 Liter (€33.33* / 1 Liter)

€74.99*