The repair filler from our company is quite easy to process, it adheres well and is excellent sanding! In addition, it is also suitable for repairing osmosis damage and fills small irregularities - hairline cracks, for example, which should disappear before processing with primer, gelcoat or paint. The application areas of the awn epoxy fine filler are under and above water! Up to 10 mm layer thickness can be achieved in one operation. Forms a waterproof and non-shrinking surface. To be processed at 10 to 35 °C.
|EUH, H and P phrases:||EUH071: Corrosive to the respiratory tract., H314: Causes severe skin burns and eye damage., H315: Causes skin irritation., H317: May cause an allergic skin reaction., H319: Causes serious eye irritation., H341: Suspected of causing genetic defects ., H361: Suspected of damaging fertility or the unborn child ., H410: Very toxic to aquatic life with long lasting effects., H411: Toxic to aquatic life with long lasting effects., P101: If medical advice is needed, have product container or label at hand., P102: Keep out of reach of children., P260: Do not breathe dust/fume/gas/mist/vapours/spray., P271: Use only outdoors or in a well-ventilated area., P280: Wear protective gloves/protective clothing/eye protection/face protection., P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting., P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]., P304+P341: IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing., P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing., P501: Dispose of contents/container to...|