Yachtcare Polyester Resin Azur VT ( 1 kg )
Product number:
510379
Weight:
1 kg
Yachtcare's Azur VT polyester resin is a laminating resin for components exposed to weathering and cold water.
Features and Benefits:
- Suitable for components exposed to weathering and cold water
- Yield: 0.5 kg- 1.0 kg/m² depending on glass fabric
- Must be covered with top coat
Please note: Coatings of YC AZUR VT must be covered with YC NAUTIC polyester topcoat.
| EUH, H and P phrases: | H226: Flammable liquid and vapour., H315: Causes skin irritation., H319: Causes serious eye irritation., H410: Very toxic to aquatic life with long lasting effects., P101: If medical advice is needed, have product container or label at hand., P102: Keep out of reach of children., P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., P273: Avoid release to the environment., P280: Wear protective gloves/protective clothing/eye protection/face protection., P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting., P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]., P403+P235: Store in a well ventilated place. Keep cool., P501: Dispose of contents/container to... |
|---|---|
| Signal word: | caution! |
Downloads "Yachtcare Polyester Resin Azur VT"
You may also like these products
Yachtcare Topcoat Nautic Topcoat VT
€31.99*
Weight:
1 kg
This already colored polyester topcoat Nautic Topcoat VT from Yachtcare (color: white) is suitable for tack-free masking for GRP coatings and polyester filler coats. Its advantage: Yachtcare Nautic Topcoat VT can be applied to coatings exposed to water and weathering - and as a final coat! Only one coat is sufficient on the sanded or tacky laminate. (Attention: Because of the kerosene skin on the surface, only one application is possible!The application should be carried out with a fur roller, after application the surface should be immediately smoothed with a fine layer brush without bubbles.pot life approx. 20 minutes at 20°C, full loading capacity is reached after five days. The ideal processing temperature is between 18 to 25 ° C.